2003 kawasaki KX 125 "forks oil put" Questions

...10W are the most common. If you have no other way of finding how much oil your forks take most bikes ive dealt with take anywhere from 350-600ml per fork. You would be safe with about 18oz per ...

oil do i put in the front forks after you put new seals in its on a 2000 kx 125 15.89-16.16 ounces. Here is an added bonus. http://www.kawasaki-techinfo.net/showOM.php?view_lang=EN&spec=US&

what amount of fork oil do i put in a 2000 kx 125 175mililitars per leg!

...forks on 94 kx 125 and oil lv and can i run atf in forks what size bolt heads on these bolts (the bolts size chart for correct torque specs is 2mm smaller than the head of the bolt on Kaw).while the ...

...oil in the crank. This odd mix usually happens if the owner doesn't know the proper mix, guesses the mix at the pump or just doesn't care what goes in so long as the bike still runs. If you found ...

fork oil should I put in the forks on a 1986 700 virago,and oil wt. hi buddy the capacity is 280ml per fork and the weight is medium How much fork oil should I put in the forks on a 1986 suzuki gs 550

forks with oil you will damage your forks. To change your oil in your forks, first center stand the bike and lift the front wheel by putting a jack under the motor. Remove the front wheel and axle and

...oil in the front forks, using 10 weight fork oil measure into a clean measuring device or mark the side of the oil bottle 413 mls, pour this caerfully into 1 fork, and the same amount into the other ...

...oil into a set of forks, yes you have to check both forks. I would suggest treading lightly. If you have time and a place to block the bike as well as a manual you can do it. Are you adding oil ...

...plugs back in then take the caps off the top of each and put in the propper amount of fork oil. You will need actual fork oil, so when you get it ask the shop how many cc's of oil to put in each