...carb and clean out all the ports. I disassemble them as much as possible and empty a can of carb cleaner into a clean coffee can let it soak overnight and then blow out all passages with compressed ...
Question about kawasaki KX 125 Motorcycles
...clean the entire carb with a spray carb cleaner from the auto parts store. Wear protective goggles to avoid getting spray in your eyes. Spray into all the little airways and fittings in the carb. ...
Question about kawasaki KX 125 Motorcycles
clean the carb(s) inside and out. Babbitts has the parts diagrams of many ATVs and motorcycles also. You didn't say what brand your ATV is so check the site and see if it is one that Babbitts handles.
...at full throttle when running but throttle was not sticking maybe floats stuck,so i took carb off cleaned it and put it back on know bike won't start at all ,i have spark going to spark plug i ...
Question about kawasaki KX 125 Motorcycles
...around for a half a day and it quit. It acts like it will run but dies out. took the carb off and cleaned it and no signs of carb probs. When u put those new things on the motorcycle, u go easy
Question about kawasaki KX 125 Motorcycles
...it will save you time and effort..carb work is NOT for amateurs..there is A LOT more to tuning/cleaning/setting a carb than a screw or
...hit the powerband in the first three gears. Just recently did a top end rebuild. and had the carb cleaned. Ive heard that the gas might be to rich, or it might need some new reeds. someone tell me ...
...fuel or there is any sign of debris in the bowl. Any sign of crud in the bowl and I would suggest cleaning the carb. You may be able the clear things enough to get the fuel to stop flowing by ...
Question about kawasaki KX 125 Motorcycles
...top of the carb, move the clip on the jet needle one notch lower on the needle. This will richen the low end fuel mix. Install a new spark plug and clean the air filter. Please rate my answer.
Question about kawasaki KX 125 Motorcycles
...clean the carb) 2. Intake leak carb joint/intake manifold.( start your motor get it to idle best you can spray wd40 around the carb joint if the rpms change you have a leak replace the carb joint or ...
326 questions posted
Usually answered in minutes!
29 Questions
21 Questions
7 Questions
6 Questions