2003 kawasaki KX 125 "carb jetting" Questions

or) your bike is running to rich( getting to much fuel to engine) which means you need to rejet the carb....example:( if you have a #50 jet,you need a #48 or 49) to install a new jet, #1.)remove carb,

...carb, noticed the solenoid rubber looks to have been messed with.. will this solenoid do the described if bad?? Is it the KIPS clogged? Is it the Jets? I don't know a lot about Kawasaki motorcycles ...

...idle even with the idle screw in the hole way and it has the revs but not the power Service your carb.I think you will find your pilot jet is blocked. Hi the lock of your needle in carb is not ...

...jetting changed on my bike win i first got it. now i want to chang them agento sompthing fatter/slower Remove carburator bowl. Main jet is the brass hexagonal nut-like part inside carb. Remove with ...

kx 85 04,bike had a slight bog when throttle was gassed then i cleaned the carb,now it really bogs and running very rich.i also messed with the air & idle screws hoping i could fix the problem ...

...jetting right. I keep fouling plugs. My current carb settings are # 35 pilot jet, # 410 main , 2nd clip position from the top of my jett needle and air screw has been adjusted in many different ...

...throttle barley turned my 96 kx 125 wont idle unless i have the throttle barley turned and the carb is rebuilt the intake boot is new no exhaust leeks The idle circuit is still plugged up or it ...

...crack the throttle it will bog and then rev up Hello you have a 1. fuel starvation problem clogged carburetor jets.(clean the carb) 2. Intake leak carb joint/intake manifold.( start your motor get

...altitude is 2100 m/s,air screw is set 1 1/2 turns out Remove the slide from the throat of the carb. Move the clip on the jet needle one notch lower. Two notches may be needed but start with

...be a problem with the main jet not delivering sufficient fuel for normal running. Clean out the carb and check the jets and passages for obstructions and