2001 kawasaki VN 1500 Vulcan Classic "pressure remove gas cap" Questions

...main Hi-Pressure cap is under the Gas Tank. You'll have to remove the tank to access it ... But there's an overflow reservoir with it's own cap behind the Right Hand Side Cover, just below the

pressure and when you put it in gear it stalls out. It has no manual with it and I don't know how to get the air out or bleed the clutch. Please can you tell me where to bleed the clutch? try this

...pressure relief valve in the gas cap is blocked.All gas caps are vented-(otherwise the tank has to be somewhere- like on Canadian models with fuel evaporative systems on them). clear the blockage or ...

pressure pushing past petcock cutoff vavle and needle seat in carb causing carb to dump gas Remove the fuel cap and try it. If the problem disappears, you need a new cap as the vent has become plugged

...pressure in excess of 2 p.s.i.), you will hear a single click; the line is probably already charged. To test - remove the gas cap, let the bike sit a few minutes (preferably out of the sun), and turn ...

...but they don't stop the tank from having pressure inside. Try removing the gas cap to see if the leaking stops. I suggest that you call the dealer that you bought it from and confirm the

...turn on petcock, allowing gas to flow into a gas can. Remove gas cap to improve/increase flow. If injected, turn on ignition to cause fuel pump to turn on, flowing fuel under pressure into gas

gas cap runs fine already cleaned out tank There might be a breather hole in the tank's cap. See if it's blocked. If the tank is completely airtight, at a given time, the pressure inside the tank will

pressure to make the carburetors work more efficiently. Think of a pop bottle; with water in it, and you just tip it up and pour out the water, it "glubs"(water has to be displaced by air to flow) Now

pressure build up. how do i find the vent tube for the tank? Remove the seat and loosen the tank to lift it up. the vent hose will be the one attached to the tank. Make sure the hose is not pinched or