2001 kawasaki VN 800 Vulcan Classic "hot water system problems" Questions

...hot water systems i have vulcan vs160 hot water system , two indicator lights are mention on this system, one of green and one of attention light (red) the problem is that, the red light is blinking ...

...hot, and suspect the head gasket is the cause of the water pressurising the system, run the bike with 1 plug removed if the cooling system is getting pressurised from a leaking gasket, then with the ...

...cap, let the fluid out. So, either replace the radiator cap if you can, or if not, take it off, and give it a good rince under hot water, give it a clean. Replace it would be better, problem

...hot to where the clutch doesnt wanna work.. Could it be water pump and what to look for?? Plz help.. This bike is giving me nothing but problems did you bleed the cooling system when you replaced the ...

BEFORE I CHANGED THE FLUID THE 1100a TEMP WAS FINE, AT 5 BARS. CHECKED WATERPUMP, OK? Antifreeze has to have a certain amount of water added or your car will run hot. Think this could be your problem

...water actually exceeds its boiling point, though the engine could exceed that temperature. This temp is not all that hot when talking about coolant (F) - I suggest you have your cooling system ...

...hot water to become trapped in the engine and the cool water in the radiator is not able to circulate into the engine. Finally, one other thing that is a common cause of bike engines running hot is a ...

...heater control set to max heat, watch the water in the system, check heater is getting warm, as the water reaches normal temperature (heater hot), top up water and replace cap. Worth a try good

...is no pressure in the system. However when hot no water circulates and the engine overheats untill the hot light comes on even with the fans running. Requires water pump replacement to fix. Good