No power to fuel pump or fuel relay Tested pump with a battery and it works fine. Not getting any power to the fuel pump or pump relay. Not sure where to look next? Buy a test pro tester and check for
Question about kawasaki ZX-6R Ninja Motorcycles
...connected? Good ground? Cables connected properly (+ to start solenoid, - to the frame?) Is there power at the battery? You measured the battery with a Volt/Ohm meter? What about the solenoid? Have ...
Question about kawasaki ZX-6R Ninja Motorcycles
...the plugs against motor and frame. check your spark plugs leads the CDI unit need to be tested for power and make sure that no wires are touching the frame as this could stop your ignition . the cut ...
Question about kawasaki ZX-6R Ninja Motorcycles
louder/deeper noise from engine/exhaust and a loss of power. hi, my 1998 zx6r became ill after a long journey, after about 250mi along the road, the engine/exhaust noise became deeper and louder with ...
...idicators Hi Disconnect the wires from the old alarm that go to the indicators as it sounds like power is bleeding back towards the alarm (probably just a diode blown or removed - this could be
Question about kawasaki ZX-6R Ninja Motorcycles
...power to the bike? Okay so I have a 2009 is ZX6R when I it's a project bike just working on it trying to get it put back together it's in bad shape but I figured it'd be a fun project well I didn't ...
...power tested at the battery to see if the generator is giving back any charge to the battery if its not then the chances are this will need replacing. check all wires first and make sure they are all ...
Question about kawasaki ZX-6R Ninja Motorcycles
...Sounds like it is stretched past its working limit? Chains are a disposable commodity on high power sports bikes. If the chain is newish, you can remove a link or
im working on a 1996 kawasaki ZX-6R Ninja Motorcycle and i have fuel and power but not getting any spark I'm not an expert but try to change your plugs or check your coil
...work your way through your wires to see where you loose power. For example: If you dont have spark, unplug your coil and see if you have power to the coil, if you do have power to the coil then the ...
216 questions posted
Usually answered in minutes!
84 Questions
79 Questions
64 Questions
51 Questions
51 Questions