1999 kawasaki ZX-6R Ninja "revs" Questions

...your out on the road then it starts to cut out then high rev and so on. will not stay at the same revs or speed Just check on your air ducts. When the bike is staionery it will idle rev and even

one carb does not want to fuel on low revs ie remove plug lead from good pot on low revs it stops remove plug lead on good pot with revs it wiil run remove bad plug lead on low revs makes no change to

The motorcycles rpms rev up between switching gears. What could be the problem? Could it be that you are not letting off the throttle when you shift? If it doesnt rev up at idle by itself there would ...

...standing. At high rev's its as sweet as a nut. The problem seems to be when riding the bike and the revs are below 4,000. When you twist the throttle, the sputtering is terrible and it struggles to ...

Poor throttle response below 4,000 revs. I have a 1999 Kawasaki ZX6R.Its the G2 model.It starts & idles without any problem.The choke works as it should.It feels as if its going to cut out ( stall

rough running kawasaki the bike starts but when you turn the throttle it revs a little and then bogs out whats wrong you need to let it warm up before beating on it. inline 4s are always cranky when ...

...I start my ninja with the Choke on it starts fine. But when i take the choke off and rev it the revs are high and won't drop. Is the choke sticking slighty?? Sounds like the idle is out

link between choke and throttle got stiff so 'choke' (the 'a bit more throttle' component) kept the revs up

my bike jerks at 6 to 7000 rpm when i drive it if my bike is standing it revs very good, when i drive it it jerks from 6 to 7000 rpm. if i pull the clutch and revs over 7000 rpm it runs beautiful. ...

when i rev my bike in nuetral its bogs out around 11 grand and then revs higher is that the power band or something else A couple of things here, the frst is you should never rev your bike standing ...