HTC G1 "tried everything turn" Questions

...tried the alt + L and wiping everything but that didnt work ethier. i did clean my phone with a damp towel could this have cause the problem?and i dont know if this is suppose to happen but when im ...

...everything. To perform a Hard Reset Turn the phone off. If it is frozen, take the battery out and put it back in. Hold the Home and Power keys down at same time for about 25 seconds. You will see a ...

...tried everything whhat do i do from here In home screen, press menu, and press settings. Press Security & location. Uncheck "Use wireless networks," and check "Enable GPS satellites." GPS should ...

...everything clean and you will loose all the data. Start by removing and reinstaling the battery. Then hold the POWER(red) + HOME buttons down to turn the phone on. YOu should see a triangle with a ! ...

TURN IT BACK ON EVERYTHING WORKS FINE EXECEPT THE LIGHT OF MY SCREEN ITS SO DARK I CULD BARELY SEE ANYTHING.WHAT DO I DO NOW? If your device gets covered in water, act fast and rationally, and you may

turn it on (while still on charger) it starts eating the battery down within 30 minutes its dead only stayin on by the charger but eventually dies. If I charge it and take it off charge it lasts maybe

...tried rebooting by removing the battery and replacing. The phone turned on but the with little charge. I then charged it overnight and thought everything was fine. However, I noticed I wasn't getting ...

tried everything through google but no luck, any factory rest modes when phone is locked?? 1. Turn the G1 off. If it?s frozen on, take the battery out and put it back in the unit. 2. Hold the Home and

...EVERYTHING if you complete this reset.** good luck :) I have had the same issue with my G1. Great Phone but does lack in very important technical areas such as battery life and sms deletion. To solve ...

...turn it off straight away, take the back off and allow to dry for several days, do not put in tumble dryer! if a problem still persists then yes u will have to change circuit board, could be very ...