On a 1986 kawasaki ninja 600r, how many turns should the air screws be? This may differ from model to model, as a rough guide with standard jetting, 2.5 to 3 turns out, screw the air corrector screw ...
...are mixture screws,if they are located on front side of carb between cylinder they are fuel/air turn counter clockwise1/4 turn to richen,if on backside of carb,between air box/filter they are ...
how many turns should i tweek the jets on the carbs. i have them at two and a quater turns now and it still dosent maintain a steady rpm. and it lacks a power in 1st and 2nd gear. ive tried quater ...
Question about kawasaki ZX-6R Ninja Motorcycles
my 1997 ZX6R won't turn on without a push start my 1997 ZX6R wont turn on without a push start and I've already had the battery replaced. what should I do? check your fuses
Question about kawasaki ZX-6R Ninja Motorcycles
97 600R C10 cuts out when handlebars are turned to the left. Acts like kill switch is on until bars returned to the right. check the wiring it may be caught or being pulled wen turning
Question about kawasaki ZX-6R Ninja Motorcycles
my zx6r 97 wont start. it turns over but wont stay on my 97 kawasaki turns over wont start from sitting for months
what position does the choke have to be In If the engine is warm it should be pushed in, or turned down. If the engine is cold it should be pulled out, or turned up.
How many times should i turn the fuel to air screw out on a 1999 zx6. i have it out 2 and a half turns is that the best? Standard is 1 & 1/2 turns out- Using a infra red Gas analyser, I found they
Question about kawasaki ZX-6R Ninja Motorcycles
Don't know which way to turn the fuel shut off switch. Just purchased my first bike; a 1998 zx-6, but continue to smell gasoline after turning fuel shut off valve to off. Bike was rebuilt, so I am not
116 questions posted
Usually answered in minutes!
157 Questions
84 Questions
64 Questions
51 Questions
51 Questions