1997 kawasaki ZX-6R Ninja "switch" Questions

I want to jump the ign switch to find out if it is bad I want to jump the ign switch to find out if the switch is bad. the bike was donated to my friend upon his release from jail so he can get a ...

...the carbs and fuel line. Check for spark. If no spark then check again with a new plug. Is the kill switch on? Does the side stand have a kill switch? Is it working properly? Tip-over kill switch on ...

my clutch is controlling the power of the batt. therefore the bike wont start,i replaced the entire switch assembly on the clutch lever, and still nothing... starter battery clutch lever is all good ,

first we do not understand what the start stop lower black spring loaded switch is for. not the red stop switch. the bike will turn over but not start. we can easily bump start the bikethe bike is a ...

key tip broke in switch how do you disassemble the ignition switch houseing to get the key switch out? Assuming you have the other end of the key, carefully put a drop of fresh superglue on the end of

headlights and tailight are out it is not the fuse or the switch on a 2001 kawasaki zx6r look at your starter switch, headlight cut off

...changing the ignition Assuming the bike is yours to ride, you could, simply remove the ignition switch, unscrew the plastic lower and separate the switch from the lock and then turn the the

My oil light won't go off after starting. Does anyone have any experience with the pressure sensor (switch) going bad or is it more likely the oil pump. The easiest thing to check is the oil switch ...