Question about kawasaki ZX-6R Ninja Motorcycles
...Clean and reinstall the sparkplug. Try starting the engine, if the engine starts, reset the adjustments you made to the carburetor prior to having the dying problem. If the engine was not ...
Question about kawasaki ZX-6R Ninja Motorcycles
how do I clean the carburator of 2002 250cc Honda TRX quad. Remove it, remove the bowl, the float, float needle, and all of the jets, and spray carburator cleaner through ALL of the ports. (You should
Question about GAS Motorcycles
How do I set float on my 96 500 sportsman polaris. I cleaned card reassembled,and gas runs out of the bowl drain hole If you didn't mess with the float level at all when you had the carb apart, ...
...hydro.clutch adjustment There is no adjustment on the hydraulic clutches...if it drags, bleed the system and check slave piston for leaks...if it slips, check that the piston in the slave isn't ...
97 ZX6R dies in neutral My ZX6R has trouble starting, unless I hold down the throttle. It will run ok as long as I'm on the gas, but it will idle very low, accelerate slowly, and shut off in neutral. ...
116 questions posted
Usually answered in minutes!
157 Questions
84 Questions
64 Questions
51 Questions
51 Questions