Question about kawasaki VN 1500 Vulcan Classic Motorcycles
1996 vulcan 1500, clutch goes away if your oil is too thick , your clutch will sleep and go away . if the clutch is old , you obviously will have the same problem . please explain your problem when ...
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
1997 vulcan unable to pull in clutch lever Friend had me put his bike together after he took it apart installed clutch per manual. After bleeding clutch. Clutch lever will not press in. Slave cylinder
CLUTCH slips on 2004 vulcan CLUTCH SLIPS WHY?? clutch adjustment or worn clutch plates will cause this , check adjustment ok then if no change replace plates !
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
Why won't clutch wont work after changing oil Hello, You probably have air in the clutch system and will need to bleed it. The following will help you bleed the clutch system and should clear up your ...
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
At low speed and taking off I have no problem with a slipping clutch, but at high speed about 100km + and hour, if i give it some gas it slips then it seems to ease off, I also don't seem to have much
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
2003 Kawasaki Vulcan 1500 Classic clutch grabs when releasing clutch lever only 1MM clutch grabs when releasing clutch lever only 1MM.... But once im riding i can pull hard on any gear without ...
Clutch wont disengage I have a 1991 Kawasaki Vulcan 1500 and the clutch will not disengage, stays in gear even when you pull in the clutch Wet clutches need the proper oil. Is there any possibility it
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
Recently purchased a '97 Vulcan 1500 C. Had 11,730 miles on it. After riding about 1,000 miles, the clutch is begining to slip when cold. Seems ok after riding for about an hour. It also clunks, or ...
bleeding clutch tryd bleeding the clutch and now there dosent feel like any thing is thwer whn i sqeeze it. The best success I have bleeding my clutch is to do it in this order. 1- fill reservoir with
clutch slippage The clutch keeps changing,at times it works fine other times it slips when starting out other times it'll stall the bike when starting to release clutch handle.At times it'll slip on ...
304 questions posted
Usually answered in minutes!
86 Questions
60 Questions
52 Questions
44 Questions
41 Questions