1990 kawasaki ZXR 750 "test starter motor fitting" Questions

starter motor was locking up due to overheat. Eventually started, drove around for 10 mins, all good. Stopped and started perfectly. Went for another quick drive 5min and it just conked out and couldn

...starter motor & test it on the bench/floor.Secure the starter motor.In a vice is best but on the floor with your foot firmlly on it will do. Using jumper leads conect it to your battery.Negative ...

...starter motor or kick starter. 4. check for spark by inserting a new plug into the plug cap. (make sure the plug is grounded). If the motor turns freely and there is spark, chances are good that the ...

...test armature and field coils If you do have a flat spot on the starter as you were told. The starter has 2, or 4 brushes that sit on what is called an armature This is a bunch of brass connectors ...

...starter motor was it a new one?? If not then you may want to check the brushes inside are not worn away. Before doing that though try running a direct 12v straight into the starter motor to see if it ...

...starter motor would engage, then the starter relay is faulty, more specifically the high current contacts; if the starter motor will not engage, then the motor would be faulty. Would appreciate a ...

...test light to the starter terminal and an earth, press the button, if it does not light, follow the cable to the solenoid and test for power to the solenoid from the battery, check earth to solenoid ...

...test the starter before reinstalling. If the spline of the starter does not mesh with the spline hole of the gear in the motor, rotate the starter enough so the splines line up or power the motor to ...