2004 Honda CBR 125 R "adjust clutch lever" Questions

Ad

Question about Honda CBR 125 R Motorcycles

1 Answer

...LEVER, THAT IS THE AMOUNT OF FREE MOVMENT YOU CAN PUL IN THE CLUTCH BEFORE ANY PRESSURE IS FELT, HAVE YOU BEEN ADDJUSTING THIS, DOES THE LEVER FEELVERY SPRINGY, IF SO BACK OF THE ADDJUSTER AND GIVE ...

Ad

Question about Honda CBR 125 R Motorcycles

4 Answers

...clutch lever pulled in, if not and it is trying to turn the engine over then it needs adjusting. when i first got my vespa it some times stalled when you put it in gear untill i adjusted the clutch. ...

Ad

Question about Honda CBR 125 R Motorcycles

1 Answer

clutch at lever to allow slightly more freeplay. Since when engaging starter it emits a "squeal" like noise just as engine catches and starts. This sounds peculiar? Did not exhibit this symptom when I

Question about Honda CBR 125 R Motorcycles

2 Answers

clutch at lever to allow slightly more freeplay. Since, when engaging starter, it emits a "squeal" like noise just as engine catches and starts. This sounds peculiar? Did not exhibit this symptom when

adjust the clutch lever to engage sooner on 04 Suzuki intruder 1500 Step 1 Pull back the rubber cover of the clutch lever to reveal the lock nut and adjusting screw. Loosen the lock nut with a wrench.

Question about Honda CBR 125 R Motorcycles

1 Answer

...clutch installed by a Guzzi dealer, can't adjust to where it shifts easily Pulling the lever releases the clutch. Disengageing it so you don't go. Ok, in order to engage the clutch fully, you release ...

Question about Honda CBR 125 R Motorcycles

1 Answer

...adjust first, and then go to your lower case adjustment, bleed system. You should have a clutch . You may have to repeat the steps until you get it right . If no clutch after that you will need to ...

Question about Honda CBR 125 R Motorcycles

1 Answer

...clutch lever in. Now quickly release the lever while pulling the outer cable to the end of the adjuster. Normally it will pop into place so you can set the clutch lever 1/4" end play. You may need to ...

Question about Honda CBR 125 R Motorcycles

1 Answer

adjust the new cable, shorten the mid-cable adjuster as much as possible. At the clutch lever, turn the adjuster in and leave about 1/4" of threads showing between the locknut and the lever body. With

Question about Honda CBR 125 R Motorcycles

1 Answer

...adjust clutch inside primary case? Because the clutch cable adjuster clearance increases with engine temperature, adjust the clutch when the engine is cold. If the clutch is adjusted when the engine ...

Not finding what you are looking for?
2004 Honda CBR 125 R Logo

59 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...