2003 Honda CBR 954 RR Fireblade "replace kickstand" Questions

...replace kickstand 85 harley fxrt - what needs to be moved - engine to access cotter pin? loose stand wobbles appears missing bushing on cotter pin side. Replacing the kickstand on a Harley FXRT ...

...replace the kickstand. It wobbles in the hole in the frame. It's designed to do so. Notice that there is a "tang" on the top of the kickstand that goes into a slot when the bike's weight is on the ...

...kickstand is up. Based upon what I have been told, it may be the kickstand switch--loose or needs replaced. Can anyone advise where this is located and what it looks like? Thanks! it's part of the ...

What is the meaning for an error code "S" on the panel of my goldwing Honda 1800?? I replaced the kickstand and now when I start the engine a code S comes up on the panel and I need to know what the ...

replace the kickstand spring on a 2000 Harley FLHTCUI? I need to install the kickstand spring on my 2000 Harley FLHTCUI. Have a friend hold bike up for you with the kickstand in,attach spring to kicks

...replace it right away if it turns out faulty. Take a ohm meter and check the kickstand switch which should be near the upper end of the kickstand. Take the 2 wires(normally) loose and connect the ohm ...

...replace your kickstand spring. what was happening was, i would be riding down the highway and it would just die for no reason, after a while i figured out it was the kickstand was coming down just ...

...can by-pass the *&%^%* thing. Thanks!! Peppers Together. The kickstand just interupts the start circuit. But! Replace the switch asap. A forgotten down kickstand will ruin your day. Goode luck, ...

...kickstand up, pull the clutch in turn the key on and hit the start button, and it should fire right up.Make sure on/off button is on too. If you tried that and it still clicks, check battery voltage, ...

Replace kickstand, Spring, AND the Bolt. Then grind the Frame on the other side of the Half moon around the hole until it is LEVEL. Find a Washer (Stainless - .030 - .050 depending on how much you had