Question about Honda CBR 600 F(4)i Motorcycles
...sprocket. i adjusted the chain. when came back from a ride the noise was still the same. so put bike on paddock stand and turned the rear wheel only to find that the chain goes loose and every time a ...
another chain when it gets that bad. you'll know it time to change a chain when you can lift it off the sprocket and see daylight between them. also this clunking could be a loose axle or worn bearing
...chain.I ride a old Harley that I have had for over 20yrs and 200000 miles.The sprocket on the wheel is rivetted on the hub so it doesnt get changed until it is bad.The front sprocket you have to pull ...
Question about Honda CBR 600 F(4)i Motorcycles
...chain sprocket for my pulsar 220f. please suggest some good companies which manufacture chain sprocket for 220f? i dont want chain sprocket provided by bajaj as its very low on quality. if possible i ...
sprockets' replacment Do I have to replace the sprockets at the same time I replace the chain? Yes. It’s likely that the sprockets are worn. Putting a new chain non a worn pair of sprockets will make ...
Question about Honda CBR 600 F(4)i Motorcycles
...chain away from rear sprocket teeth enough to expose 1/2 a tooth.worn sprockets will have 'pointy'teeth.if wheel sprocket is worn,don't ignore drive sprocket.use a quality lube designed for exposed ...
Question about Honda CBR 600 F(4)i Motorcycles
after fitting new drive and chain sprockets i still have tight spots had tight spots on the old chain When you fit new sprockets you also have to fit a new chain if you dont your sprockets will wear ...
...chain/sprocket check and drive chain alignment and tension.. Proper chain tension is very important to the life of your chain and sprockets and performance of your bike. First, you need to check to ...
Question about Honda CBR 600 F(4)i Motorcycles
SPROCKET AND CHAIN SIZES The stock rear sprocket is 41 tooth. The stock front sprocket is 15 tooth. The stock chain is 630 x 96. You can get OEM parts at www.babbittsonline.com/parts/viewbybrand/parts
Question about Honda CBR 600 F(4)i Motorcycles
...chain will get stretched out by worn sprockets real quick! Its east to tell what you have... OEM sprocket size: 16/43 - 2.68 ratio. 1. Count the teeth on your front sprocket. 2. Count the teeth on ...
85 questions posted
Usually answered in minutes!
20 Questions
24 Questions
12 Questions