My front suspension is locked up, any suggestions? i loosened the axle and the hardness is all the way down on the forks and it still won't even budge is it the forks or wheel? if forks spray with
fork is sticking up through the hole in the top triple prior to removal. if you do want to remove the triple trees and replace your neck bearings, you will have to cut the bottom bearing off, i've
...bearings cannot be reused, they must be replaced. 1. Support motorcycle so front end is off floor and forks are fully extended. 2. Remove right side cover and remove maxi-fuse. 3. Remove headlamp and ...
...fork seals and steering head bearings only then to find that the forks in my GS are not GS forks. After some investigating I have found that the forks in my GS are actually GSX Katana forks. I am ...
...bearings, swing arm bearing preload, worn defective shock, bent frame, rims. forks. misaligned forks. fork stiction. Prevention is in making all above are correct., a steering damper won't fix it, it ...
...The steering stem bearings and mounts should be okay as is. Before you buy, be sure the new forks are the same diameter as the old forks. Also check the overall length of the forks. The
fork head and adjust the bearings to just remove slop. Recheck the rotation. When putting the forks and wheel back, check the shock action of each fork individually. If the machine has a lot of miles,
Question about Honda CR 250 R Motorcycles
...bearings nuts are not loose nor are my fork tube clamps. but i still feel like the fron wheel is tracking side to side. do you know what i mean? oh ya checked front axle its tight too. are the forks ...
...the fork, press or drive out the bearings and bearing spacers by applying pressure against the spacer. Press or drive out the bearing shields from fork inner side. Hope this helps, Good Luck ...
...fork frame neck bearings(steering stem bearings). Disassemble around the handlebars down to the frame neck till you get the upper triple clamp off or can reach the adjuster nut , just underneath on ...
177 questions posted
Usually answered in minutes!
