Question about Honda CBR 1100 XX Super blackbird Motorcycles
...tensioner . the bike has covered 36000 miles it can either be a worn tensioner or need for a valve adjustment. if you rev the engine and noise goes away, you need a new cam chain tensioner. if the ...
adjust the chain so that you have 1 inch up and down play in the chain. By this I mean 1/2" above center and 1/2" below center of the chain as it sits on the bike, 1" up and down inclusive. Adjustment
Question about Honda CBR 1100 XX Super blackbird Motorcycles
adjust the chain's tension. Turn the adjustment bolts clockwise to loosen the chain, or counterclockwise to tighten the chain. Check that the edge of both chain adjuster blocks are evenly aligned with
Question about Honda CBR 1100 XX Super blackbird Motorcycles
...adjust primary chain and clutch on 04 1200c thanks First, let's adjust the primary chain first. Remove the upper inspection hole cover. Stick your finger in the hole, find the chain, and raise and ...
chain keeps coming loose Properly tensioned new chains will require readjustment after a short 'break-in' period as they stretch. Some, improperly tensioned chains have long spots in them and they are
chain will not adjust then possibly the chain & tensioner are worn & need replacement. Depending on the year it may be self adjusting. If there is no primary cover chain access hole it will be
...adjust my chain? 2) How does this compare to replacing the chain and sprockets? 3) How hard is it to adjust the chain yourself? The most important thing to me is being able to keep the alignment ...
...in normal direction of travel and see that chain is tracking true on sprocket. If not,adjust as needed with axle adjusters. IF mechanical rear brake (instead of hydraulic rear brake), adjust
...chain hitting case can i adjust clutch any more in housing? The primary chain adjustment has nothing to do with the clutch. Take the small upper inspection cover off the primary cover and use your ...
Question about Honda CBR 1100 XX Super blackbird Motorcycles
...adjust the chain. Moving the shoe up tightens the chain. Adjust the chain so that you've got between 5/8 and 7/8 in up and down movement at the middle of the upper run of the chain with the engine ...
35 questions posted
Usually answered in minutes!
30 Questions
25 Questions
14 Questions
10 Questions
12 Questions