2008 Harley Davidson FLHRC Road King Classic "cylinder compress rear brakes" Questions

compress the air in the system and the pedal feels good for a while. When the compressed air finally forces the brake fluid back into the master cylinder reservoir, the air is no longer compressed and

Rear brake cylinder not pushing fliuds Take out the rear brake master cylinder and take it apart and clean it inside. It probably need new O-Rings set inside.Take out the rear brake hose and blow some

...cylinder Capacity 124 Bore x Stroke56.5 x 49.5 mm Compression Ratio9.4:1 Induction PD52 Ignition / Starting CDI / kick Max Power 12 hp 8.7 kW @ 9000 rpm Max Torque 10 Nm @ 8000 rpm Transmission / ...

...compress the cylinder. A c-clap is what i used and it worked pretty well. Large pliers could possibly work too. Once compressed put the new pads on. If it makes it easy you may take off the whole ...

...cylinder, a metal line that has a tee in it for the rear brake switch, a rubber brake hose and a rear caliper. I'm not sure what you are wanting to know. The rear brake caliper is held into the rear ...

...cylinder: 5 Fuel control: DOHC Cooling system: Liquid Chassis, suspension, brakes and wheels Front suspensiontravel: 300 mm (11.8 inches) Rear suspension travel: 315 mm (12.4 inches) Front tyre ...

...wire to each. If all is good there you can swap the front injector to the rear(provided they are the same part-most are) and see if the dead cylinder moves with it. If it does the injector is

...rear brake pedal repeatedly until you get a full firm pedal. Check the level of the brake fluid in your master cylinder. Add only the proper type of fluid called for on the top of the master cylinder ...

...rear foot brake piston on ktm 85? I am replacing the whole kit and am trying to remove the piston from the brake cylinder. a compressed air hose will do it, just make sure it is wrapped in rags to ...