2003 Harley Davidson XL 1200 S Sportster Sport "shifter adjustment" Questions

...shifter pawl but I'm afraid that you're going to have to pull the engine drive sprocket and the clutch assembly off to repair it. To do this, you need an air wrench to remove the front sprocket nut ...

2003 1200 sportster shifter wont shift stuck in 1st gear. What might be the problem You may have a broken shifter pawl. It is located behind the clutch assembly in the primary. You'll have to ...

shifter peddal gets stuck and wont pop back up or go into first gear.the hotter the bike gets the worse it is Make sure your cltuch is disengaging. With the motor full hot (ride it a good while), shut

...adjustment on the shift linkage So, I take it you want to adjust the shift linkage and not the height of the foot pedal. To adjust the shift linkage and not the height of the foot pedal the shifter ...

...that the drum would not click back to a detent position. what would cause this problem a weak shifter cam spring? Sounds more like a shifter pawl problem. I'm not familiar with the RevTech ...

...adjustment of the shifter pawl. You may have a problem with the shifter pawl itself or the detent ball may have a problem. At any rate, it should be something that can be repaired without a major ...