2004 Ducati Multistrada 1000 DS "flat spot starter" Questions

...flat spots ,sometimes wont start when hot when cranking over Sounds a lot like a failing battery. The starter's pulling enough power that you aren't getting spark. You could try using jumper cables ...

flat spot in starter, warm or cold starter kicks in then stalls and then kicks in again until the engine starts, battery must be fully charged or engine won't start. problem was improved once ...

...flat spots on them and cause the starter clutch to slip. Replacing the rollers and the springs should eliminate any slippage. While you're doing this, make sure the screws which attach the clutch to ...

...flat so I want to recharge it. It has an optional seat which makes removing plastic cover under the seat difficult. Is there another power access point which will allow me to charge the battery? I ...

flat on my GN250. Tried replacing the battery but each time I touch the pos/neg poles the engine swings even with the ignition switched off and the engine cut off switch switched off. Where do I start

...starter motor i have had this trouble before. turn the engine by hand to check there is no major resistance, may be easyer if you take the plug out.the carburation on my kids is a pain and it will ...

...flat battery and a dead starter when I got it. I've replaced the starter and put a new battery in it, notice got lights and I can hear the fuel pump click when I switch it on but everytime I hit the ...

spot financially so its taking a lot of pride swallowing for me to ask for help here. Since I bought this bike new other than a flat it never let me sit. I know my way around pretty well so I gave you

...and then the starter switch works again. Any ideas? The starter motor has a "flat spot" in the armature. This is a common failure on those machines. Starter motor replacement is the simplest

...flat spot on starter,replaced selinoid but it still clicks when you push button,will kick start,do i need to replace starter YES starters can develop a dee bar on the commutator where that circuit is ...