2000 Harley Davidson FXDL Dyna Low Rider "motorcycle running lights tighten" Questions

gas is leaking from the peacock valve under my gas tank seems to be coming directly from the bottom,what could cause this? There's a gland nut that holds the petcock into the tank and pulls it up ...

running lights loose the right running light and turnsignal are loose. I do not see how to tighten them you may have to remove the light out of the case and tighten the holding nut inside.

...lights The left turn signal light and the running headlight on my 1991 heritage softail came loose. This is the lightthat is above the front turn signal and I can't find a way to tighten them Sorry I ...

running lights not working the right running light/turn signal is loose and I do not see how to tighten it?? If you HAD included a year and model, front or rear, I MIGHT have been able to help.

How do I adjust two front running lights on 2010 harley classic? You need a special tool to hold the light while you loosen and tighten the nut that holds it on.

1994 yamaha PW 80 and need to know the carb settings how many turns out from closed if you tightenned down tight,then you will need a new needle valve and seat,lightly screw closed,then back out 1 1/4

2013 KX450 1st gear won't up shift to neutral while engine is running and will select 2nd. Selects neutral from 2nd by lightly depressing gear lever while engine is running. Selects neutral from 1st ...

...you tried adjusting it up at the throttle on the handle bar? move ruber dirt protector and with bike running just loosen the nut and screw in to idle down and re-tighten the nut. this should

1999 suzuki 500 4 wheeler.air screw on carb? Got a 1999 suzuki 500 4 wheeler. Just cleaned carburater and think i tightened the air adjustment screw all the way up. How many turns does this need to be

I have a fuel injected 2004 Road King. Bike runs fine while throttle is open, however on a few occassions when I let off the throttle the engines stalls, speedo stops working, lights remain on. Engine