fuel/air mixture. Cracked rubber fittings, "O" ring seals, gaskets, and clamps between the carbs and the cylinder may not be sealing well enough. Note that a bad head gasket, bad valves or loose spark
...fuel to air mixture (richer because of more fuel and less air). Turn the choke off and more air is drawn in and the fuel to air mixture is reduced. There should be a mixture screw where you can alter ...
...all motorcycles and cars the fuel mixture settings are 1 1/2 to 1 3/4 turns out some carburetors are pre set and cannot be adjusted if this is the case then you will have to replace your ...
...info on your carb you will need to find out the setting for fuel air mixture screw it should turn in to reduce fuel to air mixture but find out the setting for your make of carb as they all ...
...fuel mixture and get better fuel economy without knocking and hiccups for hero Honda splendor plus. turn the mixture screw all the way in then back it out between 1 1/2 turns to 2 turns that will get ...
...fuel mixture screw setting 2004 yz250f. have put a new tusk fuel screw in carb. set it to 2 turns out. But when i screw in in the revs go up and when i screw it out it starts to stumble. From my ...
...fuel mixture on a 1983 yamaha yt 125 3 wheeler generally this is what i do. warm up engine. shut down and count the number of turns to gently seat the mixture screw. jot that info down. Then remove ...
Question about Suzuki GS 750 L Motorcycles
...the screw 1 1/2 turn and this should be sufficient to set the carburetor back to its original settings for the air/fuel mixture . 4- as for the idling screw , wind it down to suit the revs ...
167 questions posted
Usually answered in minutes!
329 Questions
228 Questions
165 Questions
158 Questions
169 Questions