HOW TO GET THE BACK WHEEL OFF CANT GET REAR SUSPENSION TO LIFT BACK TO ENABLE WHEEL TO SLOT OFF DONT NO HOW TO GET NUTS UNDER SEAT AND FRAME TO COME OFF IS THE FRAME BOLTED OR CLIPPED ON Please check ...
how do you ajust rear wheel so it is alignedright? 1.loosen the bolts on either side of the bike at the rear of the frame. this is what allows the back wheel to be adjusted. aka wheel adjusters. ...
How to remove rear wheel that is mounted on a 94 dyna wide glide harley Simplified version: Get rear wheel off ground. Remove rear belt guard, if equipped. Loosen axle adjusters. Loosen Axle nut. ...
trying to remove rear wheel I need to remove my rear wheel? Raise the rear wheel off the ground making sure that the bike is properly supported and will not fall. Remove the nut from the end of the ...
1999 kawasaki kvf 300 rear wheels siezed Is it the wheel bearings or is it the transmission? You will need to raise up the back of the bike to see if the wheel spins. Check the gears are in neutral. ...
Question about Kymco People S 200 Motorcycles
i need to know rear wheel spacer placement. also where to rreference to align the rear wheel. it seems i have un equal space between the wheel and fender. i have a total of three spacers two on the ...
how do you make frount wheel line up with the back Straight the front wheel and adjust the nut connected to rear axis by seeing the front wheel behind rear, when you cant see front wheel, it will ...
Question about Kymco People S 200 Motorcycles
i have a puncture in my front wheel of my Suzuki FXR150 2001 i have a puncture in my front wheel of my Suzuki FXR150 2001 and i need to know how to take the front tire off the bike Lift the front ...
i got a wobble on the back wheel jacked the bike up wobbled the back wheele so expecting wheel bearings. took it to garage and they vtold me one spoke had broke and the rest were loose. i was then ...
Question about Kymco People S 200 Motorcycles
how to remove rear wheel on a 1981 650xj yahama hi m8,,undo the wheel spindle nut ,,tap the spindle out of the swing arm,and untill the spindle is out of the wheel,, then undo the rear brake at the ...
47 questions posted
Usually answered in minutes!
0 Questions
1 Questions
0 Questions
0 Questions