2005 Kymco Stryker 125 "engine" Questions

...2T 50 for repair? I need to know what part I need to take off to get to the crankshaft? Take the engine out and completely disassemble the engine and cases as the cases need to be split to get ...

...does the same thing again further on down the stretch of road. What could be causing this? Hi The engine is heating up. You need to change the engine oil. This is a forced air cooled motorcycle... ...

engine starts when put in gear it stalls check the switch on the stand may not be opening. normally if you leave the stand down it will cut the engine when you put it in gear, its a safety switch.

The engine will run for 30 mins then cut out. The engine will run for about mins then cut out on my 13,000 mile 2002 bike. There is still a spark (on a plug tester) and there is still petrol coming ...

...the other day and it suddenly made a loud rattling noise and their was no power going to the revs. engine starts but makes a bad noise especially when i rev it please help Sounds like, and this is ...

where can i get mannual where can i get workshop mannual for kymco stryker 125 cc ive got the engine but its missing some parts and needs gaskets for head can you help me please hi m8 dont know about ...

should the flywheel move counterclockwise without the engine??? Typically the flywheel is keyed to the crankshaft and cannot move without rotating the engine also. If the key is sheared then the ...

...4 stroke motorcycle crankshaft at tdc, cam sprocket marks in proper position with locator marks on engine, ( this usally means on single cyl the valves will not be loaded by the cam) front of cam ...

...1: Go to mechanic Option 2: Adjust the tappets. If you have never adjusted tappets or worked with engines before it is better to have someone experienced with you. The following is the procedure I ...