...remove the seat to get to the battery There are three screws holding the seat down. One at the back which is easy to see the other two you need to remove each top side cover (left & right) to ...
...seat remove the passenger seat and seat mounting fasteners. When installing the seat insert the tang at the front of the seat into the channel in the frame and install the seat mounting nuts, then ...
Question about Motorcycles
...remove the riders seat? do the rider and passenger seat come off together? have removed 4 nuts under fender but seat won't budge In the 1994 Honda VT 600, also known as the Honda Shadow VLX 600, the ...
...the front area of the forward seat each side remove the 2 bolts lift the seat and forward to remove,then you will see 2 more bolts for the rear seat remove them slide the seat forward and remove
...behind the passenger seat is the key to removing the seat assembly. If you remove the bolt, then pull the seat upward and back to remove the whole seat. the battery is just under the front seat. ...
...Remove the seat by lifting it up and back 2- Remove the front (driver's) seat). Remove the two bolts behind it and remove the seat by lifting it up and back. 3- Removing the seats will give you ...
...remove the seat? Any advice? is this just the seat itself or the seat cover? if its the seat assembly there should be 2 bolts holding the seat down located somewhere around the rear of the seat aprox ...
...remove seat? Thanks There is no kick starter available for your model. To remove the rear seat , remove the screw at the back of the seat and lift the back and pull the seat toward the rear of the ...
Question about Kymco Venox 250 Motorcycles
seat - remove them they require a large hex head driver (if the seat is a 2 pc seat -remove the rear section first) go to the rear fender center and remove the single bolt there securing the rear seat
Remove seat and battery Yamaha tw-200 need help There are two seat bolts under the seat that must be removed. Obviously, if the underside of the fender is covered in mud, you'll have to clean it first
29 questions posted
Usually answered in minutes!
22 Questions
5 Questions
1 Questions
3 Questions
2 Questions