2003 Kymco Venox 250 "idles" Questions

Ad

Question about Kymco Venox 250 Motorcycles

2 Answers

Venox 250 (2007). Whats the knob for on the right side of the cycle, approximately opposite the choke knob on the left side? It's the idle speed adjustment. Forward (clockwise) for faster/higher idle,

Ad

Question about Kymco Venox 250 Motorcycles

1 Answer

I have a 2003 Kymco Venox and everything seems to work fine but it tends to die when its in idle. It has a new battery so Im thinking it may be the carburator. If someone can help me out with this ...

Ad

Question about Kymco Venox 250 Motorcycles

1 Answer

i have a 2005 venox 250 It idles ok but sputter and dies when I try to accelerate or rev up the engine carbs and hoses look fine what would most likely cause this? need to clean small holes in main ...

Question about Kymco Venox 250 Motorcycles

1 Answer

...carberators .It idels wel,ref wel but does not want to go slow.Can you please advise me. If it idles and revs fine, then make sure there is no binding in the throttle cables. Turn your

Question about Kymco Venox 250 Motorcycles

2 Answers

No power I just bough a 05 Venox. The kid I bought it from said it sat in his parking lot for a year. It now has no power. Can't even go up a hill in 2nd gear Change Plugs and clean the carbs You will

it idles fast if I turn the idle down it stalls running rich on top end at fast idle sometimes it will drop to a very low idle and shut off adjust the idle mixture screws first and then adjust the ...

Question about Kymco Venox 250 Motorcycles

1 Answer

carb problems my idl is to high and i think my Air/fuel ratio is off Ok, lower the idle and adjust the carb to best idle and turn down the idle and readjust the carb to best idle. back and forth till ...

Question about Kymco Venox 250 Motorcycles

1 Answer

wont idle how to adjust carb Make sure your spark plug is not fouled and the gap is correct, also air filter is properly cleaned. If it still wont idle, locate the idle adjustment on the carb. There ...

Question about Kymco Venox 250 Motorcycles

1 Answer

my vstar 1100 dies when in idle. acceleration is fine. driving, shifting, everything else is fine. when the bike is coming down to idle, it dies Is the idle speed set too low? If so, adjust it, using ...

Question about Kymco Venox 250 Motorcycles

2 Answers

trying to adjust the idle speed. running at 1500 instead of 1250 rpm The idle speed is controlled by the bikes computer, the ECU. The 1500RPM idle is normal. If you purchase a Race ECM from Erik Buell

Not finding what you are looking for?
2003 Kymco Venox 250 Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Kymco Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...