Change the fuel. Try a squirt of carburetor cleaner in the fuel line and a treatment of fuel system cleaner like Chrevron Techron. You may be able to clean it up with out disassembling the carburetor
Question about Keeway Arn 125 Motorcycles
...up would be ok. You need to disassemble and properly clean the slow circuit/slow jets of your carburetors. Unfortunately, Your carb rack is very delicate. There are some brittle and ...
...Techron may clean up minor carburetor deposits, but if the idle adjustment and the fuel system cleaner do not work, then you will have to take the carburetors off and clean them. Remove the bowl and ...
...carburetor with the plastic end of a screw driver. This may unstick the float then, a fuel system cleaner like Chevron Techron can be put into the gas gas to clean up any varnish causing the issues. ...
Question about Keeway Arn 125 Motorcycles
...carburetor. If your machine was running OK but just stopped idling after getting some bad gas, You could try a shot of starter fluid in the fuel line Or a strong dose of Chevron Techron in the fuel ...
Question about Keeway Arn 125 Motorcycles
carburetor cleaner . Gumout is too harsh for Keihin carbs. If you want to try to clean the carburetors without disassembly buy some Chevron Techron and pour it directly into the bowls. Let it sit over
...Techron might clean the inside of the carburetor with out disassembly. If you tap on the bowl of the carburetor with the handle of a screwdriver you may be able to unstick the float needle but you ...
...carburetor cleaner down the fuel line. Chevron Techron is an excellent fuel additive for cleaning up a gummy carburetor. Be sure and check the the spark plug in the motorcycle is sparking and not ...
...carburetor or leaving the choke on too long. Often the the pinging is caused by ethanol in the fuel you are using. Your bike should be designed to run on 87 Octane regular unleaded style gas. If you ...
Question about Keeway Arn 125 Motorcycles
...Techron Mixture soak in the carburetor bowl over night. If it still will not run after that, take the carburetors off and give them a proper cleaning blowing through the jets and the body
8 questions posted
Usually answered in minutes!
28 Questions
18 Questions
2 Questions
8 Questions
1 Questions