1989 kawasaki GTR 1000 "remove seat" Questions

Ad

Question about kawasaki GTR 1000 Motorcycles

1 Answer

...seat remove the passenger seat and seat mounting fasteners. When installing the seat insert the tang at the front of the seat into the channel in the frame and install the seat mounting nuts, then ...

Ad

...remove the riders seat? do the rider and passenger seat come off together? have removed 4 nuts under fender but seat won't budge In the 1994 Honda VT 600, also known as the Honda Shadow VLX 600, the ...

Ad

Question about kawasaki GTR 1000 Motorcycles

1 Answer

...the front area of the forward seat each side remove the 2 bolts lift the seat and forward to remove,then you will see 2 more bolts for the rear seat remove them slide the seat forward and remove

Question about kawasaki GTR 1000 Motorcycles

1 Answer

...behind the passenger seat is the key to removing the seat assembly. If you remove the bolt, then pull the seat upward and back to remove the whole seat. the battery is just under the front seat. ...

Question about kawasaki GTR 1000 Motorcycles

1 Answer

...Remove the seat by lifting it up and back 2- Remove the front (driver's) seat). Remove the two bolts behind it and remove the seat by lifting it up and back. 3- Removing the seats will give you ...

Question about kawasaki GTR 1000 Motorcycles

1 Answer

...remove the seat? Any advice? is this just the seat itself or the seat cover? if its the seat assembly there should be 2 bolts holding the seat down located somewhere around the rear of the seat aprox ...

Question about kawasaki GTR 1000 Motorcycles

2 Answers

...remove seat? Thanks There is no kick starter available for your model. To remove the rear seat , remove the screw at the back of the seat and lift the back and pull the seat toward the rear of the ...

Question about kawasaki GTR 1000 Motorcycles

1 Answer

seat - remove them they require a large hex head driver (if the seat is a 2 pc seat -remove the rear section first) go to the rear fender center and remove the single bolt there securing the rear seat

Question about kawasaki GTR 1000 Motorcycles

2 Answers

Remove seat and battery Yamaha tw-200 need help There are two seat bolts under the seat that must be removed. Obviously, if the underside of the fender is covered in mud, you'll have to clean it first

Question about kawasaki GTR 1000 Motorcycles

1 Answer

...seat. Use the 5-mm Allen wrench to remove the screws from the rear of the rider's seat. Lift the rear of the rider's seat upward slightly. Pull the seat back until the tabs on the front of the seat ...

Not finding what you are looking for?
1989 kawasaki GTR 1000 Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...