1987 kawasaki GPZ 500 S - GPX 500 R "throttle cables" Questions

Ad

Question about kawasaki GPZ 500 S - GPX 500 R Motorcycles

1 Answer

...throttle cables the bike still picks up revs any ideas? jets sound like they are worn blocked or similar. you might have to clean it all again or try fuch's pro fst to clean them up. have you vacuum ...

Ad

Question about kawasaki GPZ 500 S - GPX 500 R Motorcycles

1 Answer

...cables, a throttle cable and an idle cable. The throttle cable is the cable towards the front of the bike at the throttle mechanism as it pulls the throttle open. Loosen the lock nut and adjust the ...

Ad

Question about kawasaki GPZ 500 S - GPX 500 R Motorcycles

1 Answer

throttle cables from the carburetor, pull the cable from the housing by placing a drop of oil on the retaining ring that holds the cable in the housing, then firmly pull the bent tubing portion of the

Question about kawasaki GPZ 500 S - GPX 500 R Motorcycles

1 Answer

how do i install the inner throttle cable on a 1973 flh and get the length right? If you're talking about the old style throttle cable that is internal of the handlebar, it's pretty straight forward. ...

Question about kawasaki GPZ 500 S - GPX 500 R Motorcycles

1 Answer

...connect to the throttle body. When cables have been install and all parts reassembled you can carefully adjust the tension on the cables until the throttle responds the way you like it. Hope this ...

Question about kawasaki GPZ 500 S - GPX 500 R Motorcycles

1 Answer

...throttle and idle cables as loose as you can at the adjusters close to the throttle grip. Then remove the screws that hold the two halves of the throttle switch housings together. Carefully seperate ...

Question about kawasaki GPZ 500 S - GPX 500 R Motorcycles

1 Answer

Release tension on throttle cable by loosening cable adjusters. Release cable from carburetor. Release cable from throttle housing on handle bar. Reverse instruction to install new cables ...2 cables

Question about kawasaki GPZ 500 S - GPX 500 R Motorcycles

1 Answer

...cables and work them back into their slots in the throttle sleeve. Carefully reassemble the switch housing halves back together being careful not to pinch any wires. Then reconnect the cable at the ...

Question about kawasaki GPZ 500 S - GPX 500 R Motorcycles

1 Answer

...throttle or idle cables too tightly, you need just a bit of slack in each one or the throttle will hang. When you think you're finished, with the engine off, turn the throttle to the wide open ...

Question about kawasaki GPZ 500 S - GPX 500 R Motorcycles

2 Answers

...throttle cables work like they're supposed to and the carb/throttle body will close completely. To remove the clutch cable, remove exhaust system or whatever might be in the way on the right side of ...

Not finding what you are looking for?
1987 kawasaki GPZ 500 S - GPX 500 R Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...