Question about kawasaki GPz 1000 RX Motorcycles
anti dive system on my gpz100rx and how ? Yes, but why? If you see a small 4" silver bar connected to your front axle and when you press the front end it react the opposite direction that is your anti
...Anti-Dive Valves(Rebuild), AND Change Out the Fork Springs?? What is the Air Valve on the Lower Right/Bottom Fork Clamp FOR?? The anti-dive valves are easy to remove... Place the bike on her center ...
...anti dive solenoids activated via front brake activation and limit the compression of the front forks upon rapid braking, , you maty need springs, seals and thicker fork oil its hard to say exactly ...
Question about kawasaki GPz 1000 RX Motorcycles
...runs to the hadlebars are the might be a crack or small hole in it. BTW, while the system is supposed to be an "anti-dive" front end you will suffer no long term ill effects from having no air in
Question about kawasaki GPz 1000 RX Motorcycles
...anti-dive by disabling it and that's not it. I also changed pads and changed the brake fluid and that didn't do it either. The rotors seem fine so all I can think of is a proportioning valve. Has ...
Question about kawasaki GPz 1000 RX Motorcycles
...anti dive system you will have to take that bolt out as well try not to let them hang in mid air because this will but tension on the fluid lines..now take the two screws off the top of you brake ...
76 questions posted
Usually answered in minutes!
18 Questions
10 Questions