1972 Honda CB 250 "2 timing picture" Questions

Ad

Question about Honda CB 250 Motorcycles

1 Answer

...2 contact points, one for the left, and one for the right, I played with it and it seems as it has to move in a right to left motion or vis versa, when this is done it creats a spark and sends it to ...

Ad

Question about Harley Davidson Motorcycles

1 Answer

the removal of my harley davidson 1200 sportster engine Hey Kris, Are you wanting to remove the engine? THIS IS NOT HARD..just time consuming! Take your time! Take pictures so you will know where ...

Ad

Question about Honda CB 250 Motorcycles

1 Answer

...from the rear, 1, going to the front 4. All the timing marks between the cams must be aligned as well as the mark on the #2 cam must be aligned with the mark on the pinion gear. Good luck ...

...2 timing marks on them, you need to make sure that one of the dots is at the top of the gear, and he other one is inline with the head case. It's really hard to explain but here is a picture that I ...

Question about Honda CB 250 Motorcycles

1 Answer

...it backfires so on the carb there are 2 screws 1 for idle and 1 for mixture the mixture is the one you need screw it in 1/2 of turn at a time until it stops backfiring ok a picture will ...

Question about Honda CB 250 Motorcycles

1 Answer

...get going again. I've no idea of it's age. There are two numbes on the headstock :- HC04 5025 763 and HC06 11-1545 Basically all I really need to know at this moment in time is what ratio of ...

Question about Honda CB 250 Motorcycles

1 Answer

timing marks 1972 honda cl100 The flywheel cover will need to be removed from the right hand side of your crank case. You will probably need to remove the shift lever from the shift shaft too. This is

Question about Honda CB 250 Motorcycles

1 Answer

...picture to show what to do. The power wire from the generator is wired to the points wire. The points wire and generator wire are wire to the coil + The coil is frame grounded when mounted. Note:You ...

Question about Honda CB 250 Motorcycles

1 Answer

...2 and the marks must line up with cam #1, cam #3, and the pinion gear. This is one of the cases where a picture is worth a thousand words. If you'll contact me directly at [email protected], I'll ...

Question about Motorcycles

1 Answer

...2 of the fuse covers are wobbly and loose, will replace today (see picture). Also in top of pic the white connection plug next to red plug has 2 wires going in, only 1 going out is connected?? Any ...

Not finding what you are looking for?
1972 Honda CB 250 Logo

82 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...