2005 Gilera Runner VX 125 "replace spokes bike" Questions

part of the engine that connects to bk wheel i have a gilera runner 125, the back wheel suddenly snapped off. the spoke that connects on the brake and connects to the engine snapped. what is the part ...

...replace a few broken shokes. All you have to do is take the rim off the bike and take the tire off of the rim. Install the new spokes and tighted them to the specs and put everything back on the bike ...

...bike has wire spokes on its wheels so I would try a spoke tension test: - mark the rim with a marker pen adjacent a spoke. Take a screwdriver and tap each spoke in turn, every spoke if tensioned ...

...replace a spoke and to tighten the rest up. This is very unusual for the spokes to get loose on a wheel. Without seeing the wheel, I'm betting that the wheel has been relaced at some time or another ...

replace the spokes then this is much more tricky. I suggest you go to an expert but if you really must do it yourself you'll have to tell me what sort of bike, which weel(front or rear) it is plus the

...the lever, take the bike to a shop to have the brakes pads replaced. If you feel vibration when you apply the brakes, take it to a shop immediately and have them check the wheel spokes for

...bike is Bajaj Pulsar 180 (spoke model 2005) I want to replace brush set of the starter motor as motor is not working. Please tel me how to remove the starter motor. Is it need to remove the clutch ...

bike while driving shutters and acts that their is no fuel and when starting up fi light goes on plus when i down shift dies out on me spoke to a kawasaki dealer and told me to replace the battery did

i replaced the spokes on the rear wheel and in doing so, got the hub off center both ways. how can i adjust best bet is to take it to a bike shop