...a yellow wire. Use an ohmmeter at R x 100 between both wires of a connector to check the pick-up coils: resistance must be between 130 and 180 Ohms. The values of the ignition coil resistances
how to check for spark, harley springer Ignition Coil Primary Circuit Test Remove the coil. THEN set your ohmmeter scale to RX1 and place ohmmeter leads on the primary coil windings A (front of coil) ...
How do I check the ignition coil The bike will not start I checked for spark and there was none Ignition Coil Primary Circuit Test Remove the coil. THEN set your ohmmeter scale to RX1 and place ...
...cover, behind the adjustor plate. If the filament is not intact you will have no spark. A defective coil, cam position sensor, or stator will also cause a no spark condition. Ignition Coil Primary ...
...models and years, but do not know if it fits yours as I do not know what year you have: Ignition Coil Primary Circuit Test Remove the coil. THEN set your ohmmeter scale to RX1 and place ohmmeter ...
Question about Derbi Senda SM 125 4T Motorcycles
...will turn over fine but I have no fire at the plugs, installed new plugs, still no fire Ignition Coil Primary Circuit Test Remove the coil. THEN set your ohmmeter scale to RX1 and place ohmmeter ...
Question about Derbi Senda SM 125 4T Motorcycles
...my 2000 Fat Boy and 20 mins later tried to start it but no fire. Turns over but no spark? Ignition Coil Primary Circuit Test Remove the coil. THEN set your ohmmeter scale to RX1 and place ohmmeter ...
...their will not be if both plugs are out of the cylinder and there is not compression. Ignition Coil Primary Circuit Test Remove the coil. THEN set your ohmmeter scale to RX1 and place ohmmeter ...
...Have you checked any or all of these??? As a starting point install NEW plugs and also: Ignition Coil Primary Circuit Test Remove the coil. THEN set your ohmmeter scale to RX1 and place ohmmeter ...
I HAVE A KAWASAKI GT750 can you tell me which ht lead goes to which pot Theres 2 coils and 4 leads so does coil one go to1 and 3 pot and coil 2 go to 2 and 4 Or does coil one go to 1 and 2 and coil 2 ...
17 questions posted
Usually answered in minutes!
5 Questions
3 Questions