NorStar Meridian M7310 Phone "set rings tech" Questions

...set__/Line Access/Line assignment/Show line:__/...then your choices are: Appear and ring,Appear only, or Unassigned. Choose appear and ring on each line you want to answer from that telephone. Hope ...

...rings (example: if you call any of our 32 lines, the phone will ring) and if you call the extension/direct number (for this single phone) it will ring with a double ring. I want to disable the global ...

set up the phone so that you can hear it over the intercom so everyone can hear it? We don't want it to ring to every phone, just over the intercom. thank you, Lauri Hi Lauri, when the incoming caller

set? IF YOU HAVE TURNED UP THE RIN VOLUME USIND THE UP ARROW ON NAV PAD BOTTOM RIGHT OF PHONE AND IT STILL DOES NOT RING, YOU WILL PROBABLY NEED A TECH TO COME OUT AND PROGRAM IT TO RING FOR YOU AS IT

HOW DO I MAKE MY PHONE RING Ringing is set in system programming, either you need an in-house tech or your service company to make the change.

...set which extensions should ring when the day/night function is active. Only selected lines should ring throughout the office when the receptionist isn't at the switchboard. Ringing is ...

...set to EST. It goes back to Pacific time as soon as the phone rings. The key is "as soon as the phone rings". Who's ringing it? I had one of those on Packet8. I had to go to their website and get the ...

...rings with a Norstar M7310 I only want a certain line to ring without it ringing to all the phones in the whole office Normally tech side programmingIf you do not know how to program, navigate or the ...

...rings for one of the lines. How do I get it to ring for both lines? This is tech side programming known as Configuration, clients usually call in a tech/vendor for this. You need to find out the ...

...The lines must be programmed to Appear Only instead of Appear and Ring.This is done under Config/Sets/LineAccess/LineAssignment.If unsure of Config password, programming navigation then call in a ...