Question about Pride Mobility Products Health & Beauty
...light flashes. How many flashes? Count number of flashes should be a slight pause then flashes the same number of times . Your manual will give you flash codes and you can determine what the problem ...
...flash 3 times then pause. Then again. Happens when I move joystick. follow that joystick cable make sure it hasn't been pinched also i would make sure everything is connected ,you could have dis ...
Question about Health & Beauty
...with flashing (charging lights)? power turns on and no flashing lights on charge then I push the joystick and it goes crazy with flashing (charging ligts) Hi Emilee, The lights flashing crazy, may ...
...in for repair. 8 bar flash usually means you have a bad joystick/controller. They can sometimes send it in to the manufacturer to have it repaired. Find a reputable dealer and relay this info to
Question about Jet Health & Beauty
...flash. Batteries are holding 12.8 volts each. I have checked all plugs to see if they are connected and everything checks out. hold joystick back, press on button, move joystick forward, then let
...flash if the joystick is out of the neutral position at start-up. Run the joystick in a circle and back and forth feeling for any sticky or broken/dead spots. Check to see if the spring and gimble ...
light flashes 7 times 7 Flashes indicates a joystick trip. Turn off your chair, ensure the joystick is in center position without anything touching it and turn on chair. This should clear the 7 flash ...
...flash slowly. Joystick does nothing and chair is dead. Chair is Pride Jet 3 Ultra. Do all of the speed lights flash at the same time or do they ripple from left to right? If they ripple from left to ...
Question about Invacare Health & Beauty
...light does not change color or blink it could be that the joystick is bad. When nothing happens and the lights don't blink when you push the joystick knob the chairs controller basically isn't ...
...light flashes Usually a generic 'trouble' indicator. Can you read out the error codes or fault log? When both center LED are flashing and the rest of the other lights are off: There is a problem with ...
200 questions posted
Usually answered in minutes!
140 Questions
82 Questions
61 Questions
58 Questions
57 Questions