...that error for me. The cable was crimped and slightly torn (continuity test showed ok tho), but I think there are some resistance checks on power up which fail and then put out the error code
...error code can indicate the brake lever not in drive mode or if you have the electric seat its not all the way down or finally a controller problem and on the Hoveround thats the joystick. Check the ...
...wiring. Check these connectors for separation and loose, corroded contacts. Reset the error code by turning the chair off and back on once you think you have corrected the problem. Hope this ...
error code indicates a communications fault. The communication fault relates to the communication between the joystick and the control module. The joystick on the arm mount is connected to the control
...error code of 9 indicates a communication fault. With this model the problem is usually the connecting cable between the joystick and the computer module in the base. Check the connectors and wiring ...
flashing lights are error codes. 1 red = low batt., 2 red = left motor disconnected, 3 red = Left motor wiring fault, 4 yellow = Right motor disconnected, 5 yellow = right motor wiring fault, 6 yellow
...error code. Powered off and back on and all was normal again. It's done this 3-4 times it's last 2 weekes. Then the last time was same except now will not power up. Any suggestions as to what may be ...
...error flash codes: 1 RED BAR:Low Battery Voltage The battery is flat (more likely). Or the battery has a bad connection (which is unlikely) 2 RED BARS: Left Motor Disconnected The left motor is ...
...error flash codes: 1 RED BAR: Low Battery Voltage The battery is flat (more likely). Or the battery has a bad connection (which is unlikely) 2 RED BARS: Left Motor Disconnected The left motor is ...
200 questions posted
Usually answered in minutes!
140 Questions
82 Questions
61 Questions
58 Questions
57 Questions