Honda Pressure Washer PSI 3000 "water wand" Questions

Question about Simpson Garden

Will start and run fine water comes out but has no pressure

...no pressure Maybe bad pump. Remove wand and wand hose, run machine with water in. High pressure water coming out of wand/hose connection, bad wand or hose. No high pressure water, bad pump,

Question about Stanley Garden

1 Answer

Stanley motorised pressure washer. Cant get the water to flow

attached water hose but no water flow to trigger Disconnect the wand from the washer if you get water coming out of the discharge, the problem is in your wand or the line is plugged going to the wand

Question about Garden

1 Answer

I have a Husky pressure washer with a Honda

...wand and water flowed thru the hose fine. When I connect the wand and pull the trigger, nothing. I have replaced the wand and that was not the problem. Please help. check the quick disconnect to the ...

Question about Karcher Garden

1 Answer

Poor pressure and water comes out of the detergent hose

...water comes out of both the wand and the detergent hose. Pressure from the wand is not what it should be. I have replaced the wand but that didn't solve the problem. replacing the wand wont solve the ...

Question about McCulloch Garden

2 Answers

Shuts off when high pressure wand is attached

...water end on the wand turning the very end part adjust the width of spray and turning the second to end part adjust the water flow through the nozzle and that can be altered like i did inadvertently ...

Question about Garden

1 Answer

My pressure washer runs but is not getting water to the wand.

...water to the wand. some wands have a strainer that can be clogged after some time its behind the screw in the wand and see if you remove the hose from pump to see if water is flowing out of pump then ...

Question about Garden

1 Answer

Replaced the pump on my Husky 2400 think that would take care of the problem with no water pressure. Still when you squeezed the trigger no water pressure, but it still only has a very light spray.

water pressure. Still when you squeezed the trigger no water pressure, but it still only has a very light spray. What else could be the problem? Bad wand, bad wand hose, or clog at wand hose connector

Question about Garden

1 Answer

Why doesn't it work when the water hose is attached?

...can only be started/run with water attached. No water burned out pump in 5 seconds! If pump puts out high pressure water without wand/hose attached, bad wand or hose, if not bad pump. Replace

Question about Garden

1 Answer

My pressure washer will not gain pressure. What will cause this problem?

wand handle is working, so if water come out it's not the trigger handle. You can remove the wand hose, wand handle and see if there is any obstructions also. This can also be a stuck check valve, you

Question about Garden

1 Answer

Pump does not appear to be working

Pump does not appear to be working Disconnect wand/hose with water to pump run machine. If high pressure water comes out of wand/hose port, bad wand or hose. If no high pressure water, bad pump.