Honda Pressure Washer PSI 3000 "water hose" Questions

water pressure in the hose. Shut off the washer. Unscrew the hose connection from the washer and direct both hoses into the washer tub (or other container). Turn the water supply on. Both hoses should

Hose pressure water (or less) should flow from the wand. Of not, youll have to see if water is leaving the pump by inserting the nozzle (or something that will if it) into the hose connector. If water

...water hose and turn on water and water should pass straight through the pump Look for clogs in the hose-end where water hose connects to machine Turn on machine and see if water shoots out pump If ...

...water hose is attached? Pressure washers can only be started/run with water attached. No water burned out pump in 5 seconds! If pump puts out high pressure water without wand/hose attached, bad wand ...

...water supply hose turn it on before connecting the high pressure hose and let the unit self purge to the pump outlet high pressure hose fitting. Then connect the high pressure hose. 3. You could have ...

...no pressure Maybe bad pump. Remove wand and wand hose, run machine with water in. High pressure water coming out of wand/hose connection, bad wand or hose. No high pressure water, bad pump,

...water hose. Check incoming water connection for filter washer Replace filter washer If you don't have a filter washer, put one in. Hook up water, and turn on Water should come out other side of pump. ...

...hose and water flows thru strongly. I then connected the pressure hose w/out the wand and water flowed thru the hose fine. When I connect the wand and pull the trigger, nothing. I have replaced the ...

...water hose to washer collapses when use. You only need to supply the pump just 3 to 5 gallons of water per minute. Easy to check. Just open water supply to hose and capture water flowing out of hose ...

...water hose connection. The should be a filter washer. Clean or replace filter washer. Hook up water and turn on water. Water should come out other side of pump. Turn on power washer and see if water ...