...display goes out immediately upon closing the door, but comes back on by itself later, that would be quite a mystery. If you close the door then it goes out in a couple of minutes, then I would ...
...power cord and check for voltage at the outlet. Also inspect for damage, shorts, or burn marks that can be a possible safety hazard. Bad door switchIf your microwave does not work at all and you know ...
leads. No jump or... steady resistance = bad Cap. Sharp Capacitors can be found here: http://www.repairclinic.com/Sharp-Microwave-Parts?s=t-FH-DZA119WRKZ-%3d%3db113a6c12 Just note that either a CAP or
...power unit circuit board . I would like to know the right position of ribbon connector of auto-touch control panel . Look into the connector and see the point of contact which is visible of the metal ...
...display does not come on nor does the unit work any longer. It went out while in use. Also a note that the light inside dimmed and when out as the unit failed. I pulled the microwave out and checked ...
...power to everything? Any help appreciated. Dave If it's intermittent or random, it may be a bad connection, usually on the control board or a loose fuse holder, or even an intermittent fuse. You ...
...power. No didital display, nothing comes on. Dead appliance, power on wall outlet. YOUR SAFETY IS PARRAMOUNT! Attempt this only if you are competent. If your appliance has absolutely no functions at ...
...power cord and check for voltage at the outlet. Also inspect for damage, shorts, or burn marks that can be a possible safety hazard. Bad door switchIf your microwave does not work at all and you know ...
...power supply that can go bad???? The recepticles in the house works, so there is no problem there. Please help!...... I don't want to remodel my kitchen over a microwave! Ok. recepticles work, you'll ...
16 questions posted
Usually answered in minutes!
106 Questions
68 Questions
72 Questions
52 Questions
48 Questions