Question about Kenmore Microwave Ovens
display, but it doesn't "run" when you press Start, then it is probably a door interlock switch. And if it runs and makes noise (especially if the noise is louder than normal), then it is probably the
Question about Microwave Ovens
...run a cook cycle. Touchpad functions until door is opened or start button is pressed. When door is opened display goes dark. When door shuts display lights all characters and then says "touch clock". ...
gh7145xfq does not heat has power and display, sounds as normal when running, but no heating takes place Sounds like you need to replace the heating element.
...run "baked potato" setting. no functions operate, display screen functions normally. I unplugged the microwave for a few inutes, and let it reset itself. found solution on another site that ...
...normal? the new Fridgidaire range has nice bright easy to read display. MW otherwise works ok. richard l in Houston 10-24-2012 The owner's manual (here) does not mention that as a feature, so I ...
Question about Microwave Ovens
...normal if the dimming is minor. Possible causes of dim Microwave Oven display ' All About Circuits forum.allaboutcircuits.com > ... > Electronics > General Electronics Chat Jun 13, 2013 - I've seen ...
Question about Panasonic Microwave Ovens
...normal for about 2seconds & then shows the clock time. When ya hit start the oven just clicks for 2 seconds (no fan or heat). The display looks as if it was working for the 2 seconds and then ...
Question about Microwave Ovens
Just stopped working panel displays time etc but no microwaving going on This is a ge advantium pro 120 Open internal fuse Defective magnetron Defective control panel If the control panel is lighting ...
Question about Microwave Ovens
...display is normal The magnetron is the main part that gives out microwaves to heat the food. As the convection bit is working this points towards the microwave bits. The magnetron has a main diode, ...
Question about Microwave Ovens
...microwaving some food, the oven continues to run the fan and turntable. Also the display scrambles. Usually cycling the breaker restores it to normal. There could be a defect in the door
16 questions posted
Usually answered in minutes!
106 Questions
68 Questions
72 Questions
52 Questions
48 Questions