kawasaki Full Suspension Mountain Bike Men "brute force" Questions

...brute force. put it in 4wd n went into the mud. i noticed the rear was pulling n sinking but the front was not pulling. i turned the wheels to where there was little resistance from the mud n they ...

...brute force 750 I flooded my 4 wheeler under water now it spits and backfires. good chance u have a bent rod, bent valve. Need to take to shop to get checked out. try to drain carb water probably got ...

Brute Force 750 back firing thru the carburators My "06" Brute Force 750 is back firing thru the carburators and will only idle with the choke on. It's been setting up for several months. What's could

650 brute force 2wd 4wd flashing if it is limiting your speed it is your belt switch if its not speed limiting it is usually a loose cable

I have a 650 brute force, the cooling fan does not run any more,is there a fuse somewhere for this? thanks, jack There is a temp switch and a relay to run your fan.

...brute force will not run i trid setting the valves but im not sure i got them wright does any one know the correct settings hi i am naveed khan please sir first clean it with oil and then start ...

...brute force belt won't quit flashing after replaced I put a new belt on this atv and now the light won't quit flashing. I didn't know of a way to reset the switch. disconnect the negative cable from ...

...brute force 750 2005, idles fine, but when you press the throttle it backfires, is this due to a carb problem? Your jetting on the carbs are wrong. if you want more info on the jetting and how to do ...

brute force 650 much and the last few times I started it it was hard to start and it doesn't run smooth. I changed the plugs and put in fresh gas but it still runs rough. Any suggestions? Try Changing

brute force missing badly i have a 05 kawasaki brute force it started just missing a little now it is bad unless i choke it then it does fine but as soon as i flip the choke it misses it will idle but