Dremel 395 Variable Speed Multipro Rotary Tool Kit "turn" Questions

...My dremel is at least 10 years old I agree with raysaw - sounds like a job for WD40. Can you turn the flexi hose by hand? if it turns does the other end turn with it? It could be broken inside ...

dremel will not turn on? after turning dremel off and changing the bit it will not turn back on? IF you don't release the bit lock, it won't run.

...to loosen the collet. You'll see the nut just behind the collar which holds in your accessory.Turn counter clockwise. You may have to turn 1/2 to 3/4 turn for the button to engage the spindle ...

Bosch 11222EVSG hammer drill not turning I have a Bosch 11222EVSG hammer drill, it hammers ok, but the bit doesn't turn, and it gets stuck in the hole it hammers in concrete. Don't know what to do. ...

We own a homelite chainsaw. The chain continues to turn after the trigger is released. Help? if it idleing down and still turning loosen the chain a bit and oil the clutch

Why doesn't my Dremel 300 won't spin? I have a Dremel 300, it turns on, gets power, makes noise but it doesn't spin. Theres even some smoke when turned on too long. What could be the problem? Burnt ...

dremel troubleshooting brand new today used for 5 minutes now it will not turn on??? If you've allowed it to overheat, you'll have to wait before you can turn it on.

...Rotary Tool Single speed - chuck has no power - that is motor will run smoothly - - chuck will turn - but your finger can stop it - it is free wheeling on it's own even while the motor is

My dremel stylus wont turn of and I dont know what to do It is stuck in On position its probably broken, but you could just add a foot operated switch from a hardware store which costs about 4$, which

as I was using the tool the motor was over heating so I turned it off and now it won't start. Is there a reset for it? it failed. there is no rhyme or reason. Even a new anything can break at anytime.