Kohler K-10270-4-BV Forte Two Handle Centerset Lavatory Faucet with Sculpte... "bonnet nuts" Questions

Ad

Question about Plumbing

1 Answer

What is the the bonnet nut? Also known as a collar, it holds the faucet stem in place. See this: Tubs and Showers Bathroom Improvements by Contractors Solutions... faucets bonnet nut Hada Googlom

Ad

...faucets....HOWEVER.....this was a DUMB design. Channel locks won't work because the metal of the bonnet is SO thin that any squeeze deforms it and locks it up. Strap wrench will sometimes work. ...

Ad

...do you tighten the swivel part of moen faucet you need to take off the handle and tighten up the bonnet nut becarefull not to damage the o-rings inside or it will leak yu just need to make sure

How do I remove the handle to tighten the bonnet nut? LOOK UNDERNEATH THE PLACE WHERE THE WATER COMES OUT THERE SHOULD BE A SMALL SCREW OR ALLEN NUT OR BOLT TO UNSCREW. OR DOWN LOAD A MANUAL FROM YOUR

Question about Kohler Plumbing

1 Answer

how does the bonnet on the kohler K-10430 come off? After removing the oval button cap on the back of the handle loosen the set screw behind it and pull the handle up. The bonnet is threaded so hold ...

Question about Moen Plumbing

1 Answer

...bonnet nuts and handles. Turn the water back on and test the faucet for leaks. The Moen Monticello faucet comes with a limited lifetime warranty. Try calling Moen to get your replacement parts

Question about Kohler Plumbing

1 Answer

...that's leaking The handle has a allen set screw loosen that until the handle comes off then the bonnet nut will unscrew revealing the bonnet cap and washer the cartridge should be under that most ...

...single handle Moen kitchenfaucet. I I have a single handle Moen kitchenfaucet. I found out that the bonnet nut was loose. I threaded the nut back where it belongs. Now Fauset turns on and off just ...

...three full turns; you do not need to remove it. Lift the handle off the faucet. Unscrew the bonnet nut, or cover, from on top of the cartridge retaining nut; counterclockwise until removed. ...

Question about American Standard Plumbing

1 Answer

handle and spout is to hard to move. The bonnet nut may be to tight.Turn off water to faucet and remove handle with allen wrench at set screw then unscrew bonnet nut to reveal bonnet washer and valve ...

Not finding what you are looking for?
Kohler K-10270-4-BV Forte Two Handle Centerset Lavatory Faucet with Sculpte... Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Kohler Plumbing Experts

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Kohler Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...