...linkage and governor linkage. OK Gas tank is full. Hello You may have a clogged main jet in the carburetor, remove the engine shroud to expose the carburetor, the carburetor will be held on in ...
...USE COMPRESSED AIR TO CLEAN YOUR JETS AND PASSAGES, VERY IMPORTANT. Note:Before you disassemble the carburetor: Write down on a piece of paper or take a picture of how the linkage attaches to your ...
...in the spark plug hole and try starting. It should pop a few times--if so, then concentrate on the carburetor and fuel supply. Check the fuel filter, air cleaner, and muffler for plugging. Check the ...
...gas fills the block! The float needle is not closing all the way and fuel keeps leaking in to the carburetor. Replace the needle and make sure the float is not damaged and that the float pin is ...
Question about Psi Tools & Hardware - Others
...USE COMPRESSED AIR TO CLEAN YOUR JETS AND PASSAGES, VERY IMPORTANT. Note:Before you disassemble the carburetor: Mark each piece with a awl, or some kind of instrument that will make an alignment ...
31 questions posted
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions