Question about Grinders
...motor vent slot so you don't even need to take the end cap off. It works great, I upgraded the grinding wheels and comparable 1/2 hp models sell for over $90. Many grinders, and other motors are ...
motor then here is the wiring: for 240 volt 3 phase connect 4-5-6 together and tape, 3-9 goes on L1, 2-8 together goes on L2, 1-7 together goes on L3. To reverse direction swap any two line wires. For
Question about Jet Grinders
...running a short time. When the filters are installed the time is much shorter. It seems that the motor might be overheating. It can be restarted after a short time but the time running is seldom ...
...2 HP Bench grinder. When I turn it on It just hums. It doesn't turn. Can you tell me what is wrong and which part I need to change? Thank you, Marlan PS: I have misplaced the manual. The motor has a ...
...2 HP motor, where the 8-inch will be larger, likely 3/4 HP. Two very useful features to look for are a mounted work light, which will directly illuminate your work, and an adjustable rest, which ...
Question about Craftsman Grinders
...motor consist of two larger wires and two smaller wires.the two larger wires are yellow and red and the two smaller wires are black and white. i have heard of two other grinders having this problem ...
Question about Bench Grinders
...online If the plug on the cord has 2 flat prongs and one round one then its 110 VAC single phase. If the motor has 4 wires then I'd suspect 3 phase. The data plate on the motor will tell you for
motor. 115/230V, 1/2 HP, Code K. I have 2 poles at the top & 2 poles below. Question is: How can i rewire to reverse the polarity so the motor will run in opposite direction? the two poles on this
4 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: