Jacuzzi Signa 6 Whirlpool JAC-B540... "surround tub" Questions

Ad

...surround that is 58" long, depth and width do not matter. If you need it 58" the length of a tub is 60" so any enclosure will work. Most enclosure's will fit a tub that is 57" to 61" in length and ...

Ad

my tub surrounding is about a half a inch wide my tub surrounding is about a half a inch wide and normal caulking wont cure properly. how can i seal it You may want to try to find some thin ceramic ...

Ad

...tub surround that clamps together and gets screwed in at the top and sides? Did you shim the feet on the floor? Or just rely on the clips that hold it against the wall? If you can still access to the ...

...in a trap door on the tub or the tub surround. You will have to peek in there to see if there is a water valve with thermostat of some sort. I have never seen one, but you never know. Hope this

Question about Jacuzzi Home

1 Answer

...tub surround. If there is room most definitely you can place the faucets on the tub itself. You can mount them on the left rear. However be very careful drilling the holes and make sure you have it ...

tub surround? You have no box for the tub to sit in? What were planning on using to hide the sides of the tub? Most big tubs, whirlpools, jacuzzis, etc, sit in a frame work of two by fours and plywood

...So water was pouring inside the tub and walls. Plumber says whole tub must be removed (100% surrounded by tile) to either replace all jets and plumbing or to replace entire unit. Is there any ...

Question about Home

1 Answer

surround? If so, we need an idea about how to cover or trim the tub lip on the outside of the tub. Thank you for any advice you can give. Betty Ferrell 1Cut the tip off the tube of caulk, and load the

My bath tub with jets hums and I can't find an access panel. The tub is located on a platform and surrounded by ceramic tile. I do not see an access panel. I'm prepared to remove tile but would like ...

...tub that would have to have the surround marble pieces that are grouted in removed to access those jets - what do I need for parts - this house was built in 1984 - motor control is on the wall away ...

Not finding what you are looking for?
Jacuzzi Signa 6 Whirlpool  JAC-B540... Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Jacuzzi Home Experts

US Parts Center
US Parts Center

Level 3 Expert

719 Answers

Mike

Level 3 Expert

4357 Answers

john h

Level 3 Expert

21173 Answers

Are you a Jacuzzi Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...