Jacuzzi Signa 6 Whirlpool JAC-B540... "bathtub turning sounds water" Questions

...bathtub is designed to NOT allow the pump to run without water contacting it. It sounds as if this is operating as it should. Once the pump comes on you should be able to touch the "logo" or the ...

bathtub jets motor turns on but there is no water Basically I hit the switch and I hear a humming sound and thats it. sounds like the pump is getting power but is not spinning. check that the pump can

...Bathtub Was rinsing out the tub and when I tried to turn the cold water off, the valve kept turning and now it won't shut off. Help Sounds like you have a faucet that has a stop that is on the handle ...

...bathtub is failing to operate. When it is turned on the pump just makes buzzing sound and if left on too long the breaker for the pump kicks off. There is no access panel to the pump so there is no ...

...... The whirlpool system does notstart and a light flashes 3 times on the keypad. ... Fill the bathtub with warm water. 2.... I press on the air push button but the system does not turn on or

...know what the problem is. sounds like maybe a bad high limit switch. the high limit is set @ 112 degrees by default. if it is turning your system off before it reaches that temperature then it is

...bathtub problem When the unit is turned on it has been spitting out black chunks of grease/slime which fill up the tub and stick to the sides when drained. Does it need cleaning or is the pump/engine ...

...Sounds to me like if the water gets above a certain level the water starts to leak then that is what it tends to be. pumps will leak water when they turn on if the seal inside the pump is worn

Tub faucet (hot side) won't turn off when tight and the shutoff valve won't stop the water either The original plumbing was replaced with flexhose and hot and cold faucets. They worked fine up until ...

...turning off??? it just turns and turns?? It sounds like the valve is stuck and the valve handle is bad. All toy need to do is remove the screw from the valve handle, remove the handle, use a pair of ...