Question about Craftsman Air Tools & Compressors
every other nail. will shoot one nail then jam. must take nose plate off and remove nail. My Reliant brad gun won't take an 1 1/4" brad. It only goes up to 1 3/16". I have to find more of those myself
...brad jam?. Now, however, the driver guide cover ?a? does not want to close far enough for the ?latch? to hold the front of the gun shut. IAs far as I know I did not lose any parts when clearing the ...
Question about Porter Cable Air Tools & Compressors
to up position to reload brad nail. Strip and clean the whole diaphragm and spring arrangement. Also check whether a bad nail hasn't damaged the piston guide and caused it to jam when on return stroke
...need lubrication, new return spring, etc. All related to the anvil firing. You could have a brad jammed in the nailer--that's exactly what mine was doing. I had to remove the front plate (there
bn125 brad nailer is jammed I removed the nails. the nail pusher is in down position It won't go back up. I've had to remove the plate over the "firing pin" a couple of times (the allen wrenches come ...
Question about Porter Cable Air Tools & Compressors
MY 18GA nailer will fire but it wont fire the nail. Usual causes: Driver doesn't move back far enough. Usual cause of this is inadequate lubrication. Load a bunch of air tool oil, say 20 drops and ...
I was trimming a house yesterday and my finish pro 18 quit working. The driver would not return. I could manually push it back to the starting position and then it would fire once, then stay in the ...
70 questions posted
Usually answered in minutes!
42 Questions
38 Questions