Pride Jazzy 1103 Ultra Standard Power Chair  "chair joystick problems" Questions

...chair will not move. The joystick is flashing 8 times. Apparently a joystick fault? Any self-service suggestions? There isn't too much you can do to fix this problem. You will have to have the ...

...chair, ensure the joystick is in center position without anything touching it and turn on chair. This should clear the 7 flash code. This problem is quite common amongst power chair users. It ...

...they might have. Now there are 2 cables one from the joystick to the base of the chair and one from the base to the controller either could be bad but try the one to the joystick first Hope this ...

...joystick all the way down to the back of your chair make sure everything is connected. If that checks out ok it could be your on off button .Thats on your joystick it may be ''sticking'' if you have ...

... Turn the chair on move the joystick forward till you hear a beep then move the joystick to the rear until you hear another beep release the joystick and the lights should quit flashing Hope this ...

Joystick does nothing and chair is dead. Chair is Pride Jet 3 Ultra. Do all of the speed lights flash at the same time or do they ripple from left to right? If they ripple from left to right the chair

indicates a problem code to the technicians. My chair needed the joystick control assembly replaced. Once replaced, evrything was back to normal. 'Not a cheap fix but much needed. Good luck my friend!

...to be replaced since there is no self repair fix Unless you can locate a good used joystick/controller for cheap (around $600.00 rebuilt) I would return the chair and get my money back Hope this ...

...seems to be the joystick. If the chair's joystick will make the motors turn your chair but won't go forward or back then the problem is in the joystick and will have to replaced. Sorry hope this ...

...joystick. Now the chair will not work. What can i do to fix this problem? Power chairs are not designed to operate while they are plugged into the charger, as it will drag the charger around or you ...